Star Micronics DP8340 - Page 23

– 19 –
CODE
FS
(1C)
H
FUNCTION
Trigger peripheral unit drive (immediate)
OUTLINE
Causes a peripheral drive pulse to be generated immediately.
CODE
SUB
(1A)
H
FUNCTION
Trigger peripheral unit drive 2 (immediate)
OUTLINE
This command causes a peripheral unit drive 2 pulse to be
generated.
Pulse Duration : 200ms (fixed)
Delay : 200ms (fixed)
REMARKS
It is impossible to drive peripheral devices 1 and 2 at the
same time.
CODE
CAN
(18)
H
FUNCTION
Clears print buffer
OUTLINE
Upon input of this code the data buffer and line buffer is
cleared.
Executed by BEL code and FS code after printing.
CODE
BEL
(07)
H
FUNCTION
Trigger peripheral unit drive (Deferred)
OUTLINE
Causes a peripheral drive pulse to be generated. This code is
normally stored in the buffer and is performed as it is received
from the data queue.