– 22 –
6. GENERAL SPECIFICATIONS
Printing method Serial impact dot matrix printing,
9 wires
Number of print columns 40 columns, 12 CPI
Print speed Approx. 2 lines/sec
Print direction Bi-directional
Line spacing 1/6 inch
Paper feed method Friction Feed or Sprocket-feed
Paper feed speed Approx. 12 lines/sec
Character set ASCII 96
Special 64
Block graphics* 64
Katakana (Japanese) 64
IBM Special 83
IBM Block graphics* 50
Download 10
Font configuration Ordinary characters 5 × 9 dots
Block graphics* 6 × 6 dots
(6 × 8 dots)
* Graphic Feed Not Available
Character size 2.42 (H) × 1.71(W) mm
Dot spacing 0.35 (H) × 0.35 (W) mm
Print area 84.3 mm
Print Buffer Approx. 1.5 KB
Interface Parallel Interface (Centronics compatible)
Peripheral drive 2 outputs (each 1A max. at 12V. Both cannot
operate at the same time.)
External dimensions
(Printer) 202(W) × 200(D) × 98(H) mm
(without paper holder, DC Power Connector)
(Power supply unit) 60(W) × 120(D) × 36(H) mm (without AC cable)
Weight
(Printer) Approx. 1.9 kg
(Power supply unit) Approx. 0.4 kg (without AC cable)
Power supply unit
Four supplies available with following ratings
Input Output
AC 100 – 240 V DC 12.0 V ±
5%
47Hz – 63 Hz
0.8 A Max 2.0 A
To Next Page
Loading...
