Star Micronics IFBD-HE07X - 3.1.7 TELNET Server

IFBD-HE0708 BE07 User’s Manual
3-17
3.1.7. TELNET Server
The TELNET (TELecommunication NETwork) of this product allows you to change NIC settings, network network displays,
and to monitor the printer status. See section 3.3 Settings/Display Items for details on displaying information. Use TCP UDP
communications port 23 for the TELNET server.
 The maximum number of sessions that can be connected simultaneously with TELNET is 8.
 By specifying to execute the print settings when writing the settings, you can verify whether the setting
contents were correctly written to the non-volatile memory. Also, if writing was successful, the printer will
automatically be reset.
An account has multiple accounts at login. The user names and passwords are as follows.
Items that can be viewed and set vary by the account.
Account User Name Password Target
User “user” “guest”
• 1 to 31 characters of ASCII (Can be changed)
General Users
(Only information display)
Root Users “root” “public”
• 1 to 31 characters of ASCII (Can be changed)
System administrator
(Information display and writing)
(1)TELNETcommandexecutionexample(Ex.:ChangingaxedIPaddress)
The following is an input example of the Windows command prompt. UNIX/Linux shell input is the same.
(Assumed Condition) • Printer IP address acquired by DHCP is 192.168.10.3
• The Pritner IP address to be set is 192.168.10.1; subnet mask is 255.255.255.0.
←telnetconnection
←Enterusername
←Enterpassword(Default:public)
←SelecttheIPparametersetting
←SelecttheStaticsetting
←SelecttheIPaddresssetting