IFBD-HE0708 BE07 User’s Manual
2-1
2. HARDWARE SPECIFICATIONS
2.1 Model Names
There are three models available. They differ in the bracket for mounting to the printer.
Models that support StarWebPRNT have an “X” at the end of the model names.
IFBD-HE07 / IFBD-HE07X IFBD-HE08 / IFBD-HE08X
IFBD-BE07 / IFBD-BE07X
Products that support SSL/TLS have a "S" shape engraved on the NIC chassis. (F/W Ver4.0.0 and later supports SSL/TLS.
However, products that do not have an engraved “S” shape, cannot support SSL/TLS even if the F/W is upgraded to Ver. 4.0.0 or
later.)
The position of the engraved "S" shape
IFBD-HE
IFBD-BE
If this product has F/W Ver. 5.0.0 or later, there is an “M” shape engraved next to the above “S” shape.
The following shows example printers that comply with the product names.
Product Model Name Compatible Printer (Representative Examples)
IFBD-HE07
TSP700II, TSP800II, TSP650(*1), TSP650II
TSP828L(*1), TUP500(*1), TCP300II(*1), TCP400(*1)
IFBD-HE08 TSP1000(*1), SP700, SP500(*1), HSP7000(*1)
IFBD-BE07 FVP10
The models indicated by (*1) are not supported by this product with F/W Ver. 5.0.0 or later.
See “5.2. Printer Firmware Support Table”, for details on the printers that support IFBD-HE07X/08X/BE07X.
Refertoeachprinterproductspecicationsfordetailsonmodelsandmountingconditions.
To Next Page
Loading...
Need help?
General
