IFBD-HE0708 BE07 User’s Manual
3-38
3.2.5. Self-test Print
If this product executes a printer self-print, the following is printed after the printer setting print.
Finally, for the IP parameter information during operation, it is not possible when conducting a self-print by command from the PC.
Self-test Print Example (For F/W Ver. 5.0.0 and StarWebPRNT model)
Version Information (Main, Boot Load, PLD)
NIC Setting Information
(Same as the *netconf.ini” File)
* The Web Print setting items are for models
which support Star WebPRNT only.
* The SNMP setting items are for F/W Ver. 5.0.0
or later only.
To Next Page
Loading...
