Star Micronics IFBD-HE07X - 7.1.4 Required Settings when Registering Certificates with iOS 10.3 or Later

IFBD-HE0708 BE07 User’s Manual
7-22
7.1.4.RequiredSettingswhenRegisteringCerticateswithiOS10.3orLater
WithiOS10.3orlater,whenacerticatewasinstalledmanually,thatcerticateisnotautomaticallytrustedforSSLcommunication.
Settings at the iOS device are needed. An example of the iOS settings is shown below for reference.
(For details, check the Apple HP. https://support.apple.com/ja-jp/HT204477)
1.Followtheprocedurein“3.Importacerticatetothewebbrowser”insection“7.1.1.Usingaself-signedcerticate”andimport
thecerticate.
2.Insequence,select“Settings”>“General”>“About”>“CerticateTrustSettings”.
3.Enablecerticatetrustwith“ENABLEFULLTRUSTFORROOTCERTIFICATES”.
Use the address beginning with “https://” and check that the printer web setting screen is displayed correctly.