Star Micronics IFBD-HE07X - Page 30

IFBD-HE0708 BE07 User’s Manual
3-21
Directory,FileCongurationandFunctions
Directory
Filename
Note 2
Extension
Restriction
Note 3
Transfer
Mode
Note 4
Account Limit Note 1
user root Function
/ - -
None (Root directory)
/lp/ printdat.prn No Binary W W
Print Output to Printer
→See“3.1.8.1FTPPrinting”
/net_cong/ netconf.ini “.ini”
Binary or
ASCII
R R/W
Reads and updates network settings
→Seesection3.1.8.2NICSettings
/status/ netstas.txt -
Binary or
ASCII
R R
Reads operation information of operating net-
work
nicver.txt -
Binary or
ASCII
R R Reads network card version information
prnstas.txt -
Binary or
ASCII
R R Read printer status (hexadecimal dump display)
deviceid.txt -
Binary or
ASCII
R R Read Printer Device ID
/rmware/ NIC_MAIN.bin “.bin” Binary - W
NIC Main F/W Update
→See“3.1.8.3F/WUpdate”
/freespace/ - No
Binary or
ASCII
R R/W Free space
Note 1. Account Limit
R: Read Only; W: Write Only; R/W: Read/Write; -: No Function
Note 2. Filenames
Filenamesshouldbelessthan32characters,includingtheextension.Therearenorestrictionstolenames
to write, except for the extension. Usable characters are limited to English numbers and alphabet. (“A”to”Z”,
“a”to”z”, “0”to”9”)
Note 3. File Extension Restrictions
Whenanextensionrestrictionisspecied,thelenamespecied,otherthanthespeciedextensions,is
rejected.
ThereisnoconceptofextensioninUNIX/LinuxandMacOSX,butthisrestrictionisappliedtothenalfour
charactersofthelename.
Note 4: Transfer mode
FilescanbetransferredbyBinaryalone,orASCIIcanbespecied.However,specifyalwaysBinarymodeto
preventspecicationmistakes.
 Note5:Observethefollowingrestrictionsforthetotalsizeforlesandnumberoflesthatcanbeuploaded
to the free space.
• Total File Size: Max. 640 K bytes
• Total Number of Files: Max. 10
Also,donotplaceanexecutableleinthisdirectory.