Star Micronics IFBD-HE07X - Page 69

IFBD-HE0708 BE07 User’s Manual
7-3
Select[ENABLE]inthe"SSL/TLS"drop-downlistand[Self-Signed]inthe"Certicate"drop-downlist,andthenclick[Submit].
The following information is displayed. Check that the following information matches the information on the screen. SSL/TLS:
ENABLE,Certicate:Self-Signed.
Click[Save].Onthesavescreenselect"Save→Congurationprinting→Restartdevice",andthenclick[Execute].
The printer prints the settings information. Check that the settings are the same as shown below.
• SSL/TLS: ENABLE
• Self-Signed Certifcate: Exist
•Certiate:Self-Signed
TheproceduresforcreatingtheNICself-signedcerticatearecompleted.