Star Micronics IFBD-HE07X - Page 75

IFBD-HE0708 BE07 User’s Manual
7-9
Select [Install] when the following screen appears.
Select [Install] when the following screen appears.
Installation is complete when the following screen appears. Tap [Done].
Turn on the printer's power again, and check that the printer's web screen displays normally by entering an address beginning with
"https://".
When using iOS 10.3 or later, additional settings on the iOS side are required. Therefore, also refer to section 7.1.4 “Required
settingswhenregisteringcerticateswithiOS10.3orlater”.