EasyManua.ls Logo

Star Micronics SM-T300I SERIES - Page 17

Star Micronics SM-T300I SERIES
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 10 -
CAUTION
When the paper is jammed, be sure to open the printer cover before removing the
jammed paper.
Do not under any circumstances try to pull out the jammed paper forcefully while the
printer cover is closed. Doing so may damage parts of the printer.
Caution Symbol
is symbol is placed near the thermal head to indicate that it may be hot.
Never touch the thermal head immediately aer the printer has been used.
Also, even when the thermal head is not hot, do not touch it, because static electricity
can damage the devices inside the thermal head.
WARNING
1) Do not touch the tear bar.
• ereisatearbarinsidethepaperoutletslot.Notonlyshouldyounotputyourhand
in the paper outlet slot while printing is in progress, never put your hand into the out-
let even when printing is not in progress.
• epapercovercanbeopenedwhenreplacingthepaper.However,sincethetearbar
is on the inside of the paper cover, be careful not to place your face or hands too close
to the tear bar.
2) During and immediately aer printing, the area around the thermal head is very hot.
Do not touch it, as you could be burned.

Related product manuals