Why is there a delay in printing with Star Micronics SP 200?
If there's a considerable delay between the print start command and actual printing with your Star Micronics Printer, note that processing time depends on data volume; graphics-heavy documents take longer. To speed up printing, reduce the printing resolution using the printer driver.
How to prevent print job cancellation on Star Micronics SP 200?
To prevent print job cancellations on your Star Micronics Printer, set the I/O Timeout to a larger value than the current settings.
General| Brand | Star Micronics |
|---|---|
| Model | SP 200 |
| Category | Printer |
| Language | English |
Step-by-step guide on how to load paper into the main input tray (Tray 1).
Step-by-step guide on how to load paper into the bypass tray.
Explains how to print a document using the printer driver from a computer.
Provides methods for canceling print jobs before or during printing.
Details how to modify machine settings such as custom paper sizes and energy saver modes.
Provides instructions for updating the machine's firmware using the Smart Organizing Monitor.
Step-by-step guide on how to replace the print cartridge when toner is depleted.
Important precautions and guidelines for safely cleaning the machine's exterior and interior.
Step-by-step instructions for cleaning the internal parts of the machine.
Lists common issues like the machine not turning on or pages not printing, with their causes and solutions.
To Next Page