Service Menu
STAR TRAC FITNESS 7 of 8 637-1414 Rev: A
2. Wait until the USB source is recognized by the system. The USB icon will come on (Fig. 11).
Fig. 11
3. From the TV Setup screen, select Export TV Config. A prompt will say that the files successfully exported.
4. Remove the USB drive and insert it into the center console of the next unit.
5. Wait until the USB source is recognized by the system.
6. From the TV Setup screen, select Import TV Config. A prompt will say that the files have been successfully
imported.
7. Test TV function.
Troubleshooting
This document contains the follow troubleshooting instructions:
• TV icon is inactive after a channel scan/ no channels found
• No channel scan options
• Cable/Signal Requirement and Issues
To Next Page
Loading...
