Star Trac E-TRe - User Manual

Service Menu
STAR TRAC FITNESS 1 of 8 637-1414 Rev: A
TV Setup and Troubleshooting
E-TRe & E-TRxe
The following procedure will guide you through the Channel Scan of the Embedded E-TRe and E-TRxe treadmills.
Step 1
Start on the default screen (Fig. 1).
Fig. 1
Step 2
Press and hold the VOL ‘+’ key and the CH ‘+’ key and the number ‘3’
key on the keyboard at the same time to enter the Service Menu (Fig.
2).
Fig. 2
VOL
CH
Step 3
Press the number ‘5’ key on the keyboard or touch “Calibration And
Setup”.

Summary

TV Setup Guide

Accessing the Service Menu

Steps to enter the service menu via keyboard shortcuts and password.

TV Setup Menu Overview

Explanation of the six options available in the TV Setup menu.

Performing a Channel Scan

Guide to scanning for TV channels using various broadcast standards.

Channel Maintenance Functions

Functionality for hiding/renumbering channels and adjusting audio gain.

Manual Channel Configuration

Manually setting channel frequencies for analog TV.

TV Configuration Transfer

Exporting and importing TV configurations using a USB drive.

Troubleshooting TV Issues

Inactive TV Icon Troubleshooting

Flowchart for resolving an inactive TV icon after a channel scan.

Bypass Coax Cable Procedure

Steps to bypass the internal coax cable for screen connectivity issues.

Known Good Cable Source Test

Method to diagnose cable problems by swapping with a known good source.

No Channel Scan Options Fix

Resolution for missing channel scan options by reseating the tuner card.

Cable and Signal Integrity

Requirements for coax connectors, signal strength, and common connection problems.

Star Trac E-TRe Specifications

General

Running Area	20" x 60" (51 cm x 152 cm)
Speed Range	0.5 - 12 mph
Incline Range	0% to 15%
Heart Rate Monitoring	Contact and Telemetry
Display	LCD
Programs	Multiple including heart rate control