Star Trac E-TRxe Troubleshooting Guide

32 pages

To Next Page

Troubleshooting

STAR TRAC FITNESS 1 637-1383 Rev: A

Treadmill Embedded Touch Screen Won’t Power Up

E-TRe and E-TRxe

This document contains the necessary information to troubleshoot a treadmill with an

embedded touch screen that will not power up.

Follow the flowchart on the next page.

All documents referenced in the flow chart are also included.

Other manuals for Star Trac E-TRxe

B
Betty MitchellAug 16, 2025
What to do if the Star Trac Monitor shows an emergency stop condition?
- R
  rachelgarciaAug 16, 2025
  First, reset the E-Stop switch to make the product operational. If the problem remains, inspect the cables and connections within the Hot Bar, including the e-stop cable connecting the Hot Bar to the FitCPU. If issues continue, examine the communications cable linking the FitCPU and the Translator Board. Should all these components appear functional, consider replacing the Translator Board.
W
waltersjoeAug 19, 2025
How to fix timeout during start-up hand shaking on Star Trac Monitor?