Star Trac ELITE User Manual (English)

Other manuals for Star Trac ELITE

Questions and Answers:

R
Robert HallAug 3, 2025
What to do if my Star Trac ELITE displays 'EL STL' error?
- A
  Alisha WyattAug 4, 2025
  If your Star Trac Treadmill's elevation system has malfunctioned, begin by engaging Motor Test Mode to check the elevation response and the corresponding LEDs on the MCB. If there's no LED activity or response from the elevation motor, the MCB might need replacing. Also, make sure there isn't anything blocking the elevation screws or belt. Binding elevation screws, possibly due to a lack of cleaning and lubrication, can also cause this issue. Finally, check that the elevation idler isn't loose or damaged, as this could lead to binding.
A
Anna KellyAug 7, 2025
What to do if my Star Trac ELITE Treadmill displays 'NO SENSOR' error?
- N
  Nicholas BrennanAug 8, 2025
  If your Star Trac Treadmill displays 'NO SENSOR', it could be due to a sudden speed change detected by the RPM Sensor, a loss of speed feedback, or a loose cable. Start by engaging Motor Test Mode to check the speed response; no response indicates the RPM Sensor may need replacement. Then, check if the RPM Sensor LED on the MCB is responding; if not, the MCB may need replacing. Also, verify that the MIN SPD, ½ SPD, and MAX SPD are correctly set in Manager Mode. Finally, engage Speed Calibration; if calibration fails, the MCB may need replacement.
N
ngonzalezAug 12, 2025
What to do if my Star Trac Treadmill displays 'SPEED CHG' error?
- M
  Michelle MccoyAug 12, 2025
  If your Star Trac Treadmill displays 'SPEED CHG', this indicates a sudden speed change detected by the RPM Sensor or irregular speed at high or low speeds. First, engage Motor Test Mode to verify the speed response; no response suggests the RPM Sensor needs replacement. Also, check if the RPM Sensor LED on the MCB is responding; if not, replace the MCB. Verify that the MIN SPD, ½ SPD, and MAX SPD are correctly set in Manager Mode. Engage Speed Calibration; if it fails, replace the MCB. Lastly, ensure the motor brushes are secured within the motor.
R
reyesandrewAug 16, 2025
What does 'EL LOST' mean on my Star Trac Treadmill?
- M
  Melissa RossAug 16, 2025
  If your Star Trac Treadmill displays 'EL LOST', it means the elevation motor readings are out of range or the reading is lost. Combine Motor Test Mode with Elevation Calibration to verify that the elevation motor readings are within range. Check that the Elevation Motor Range changes in increments of 1% as the treadmill elevates up and down; erratic increments indicate a faulty display cable or elevation motor.
J
justin57Aug 20, 2025
How to fix 'EL RANGE' error on Star Trac ELITE Treadmill?
- P
  patriciahaynesAug 20, 2025
  If your Star Trac Treadmill displays 'EL RANGE', it indicates that the elevation motor readings are outside the acceptable range. To resolve this, engage the Elevation Calibration feature and verify that the elevation motor readings fall within the specified range.

Star Trac ELITE Specifications

General

Type	Treadmill
Motor Type	AC
Incline Range	0 - 15%
Speed Range	0.5 - 12.5 mph
Running Area	60" L x 20" W
Deck Cushioning	Soft Trac
Display	LCD
Power Requirements	110V
Motor	3.0 HP