To Next PageTo Next Page
Need help?Do you have a question about the Star mC-Print3 MCP31LB and is the answer not in the manual?
General| Print Method | Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Paper Width | 80 mm |
| Dimensions | 132 x 140 x 125 mm |
| Print Method Option | Direct Thermal |
| Print Speed (ips) | 9.8 ips |
| Maximum Print Width | 72 mm |
| Print Speed | 250 mm/sec (Max) |
| Connectivity | USB, Bluetooth |
| Print Technology | Thermal |
| Paper Width Options | 58 mm |
| Interfaces | USB, Bluetooth |
| Interface Options | USB, Bluetooth |
| Supported Barcode Types | UPC-A |
| Supported OS | Windows, iOS, Android, Linux |
| Power Supply | External |
Connect the Ethernet cable to the printer's LAN port.
Download and install the “StarPRNT SDK” application from the App Store.
Locate the printer's IP address using the StarPRNT SDK.
Navigate the StarPRNT SDK to select the LAN interface.
Record the printer's IP address obtained from the StarPRNT SDK.
Enter the printer's IP address and enable Star Web Print in the Dolphin POS app.
Open the printer's web configuration interface using its IP address.
Use the FEED button and power cycle to print the current IP address.
Log in to the printer's web utility using default credentials.
Enter IP address, subnet mask, and gateway in IP Parameters.
Save the configured static IP settings to the printer for activation.
Download and install the “mC-Print Utility” tool from the Apple App Store.
Launch the utility to view available printer options and functions.
Access initial setup guides and printer connection options within the utility.
Perform diagnostic checks on printer functions and peripherals.
Configure printer settings and update firmware to resolve communication issues.
Access frequently asked questions, manuals, and product web links.
