2.2.1 iOS
1. Press and hold MODE button for approx. 2 seconds, and printer is turned on.
2. Pairing is not required. Select the model from your application.
Device name: “STAR L200-XXXXX”(default)
(XXXXX is the last five digit number written in the "Serial No." column on the bottom of the printer.)
2.2.2 Android
1. Press and hold MODE button for approx. 2 seconds, and printer is turned on.
2. Open the tablet settings screen and select Bluetooth.
3. Turn ON Bluetooth.
Select the displayed device name (STAR L200-XXXXX), and enter the PIN code.
4. When the device name is displayed under "Paired devices", pairing is completed.
To Next Page
Loading...
