3.3 Memory Switch Settings
Change the Memory switch by following operations. (Refer to P16 “Memory Switch Setting Table”).
1.Press and hold MODE button for approx. 2 seconds, and printer is turned on.
2.To put the printer into Memory Switch Setting mode, press and hold both the MODE & FEED
buttons for 5 seconds. After printer displays “Enter Menu Mode”, you can configure the settings.
Release the buttons after you surely confirm the screen display “Enter Menu Mode”, to get a printer
into the setting mode.
3.To switch the Menu and option parameter , or return to the previous menu, press MODE button.
4.To move the cursor(“_”), entry the printer mode, or confirm the new setting, press FEED button.
CAUTION
Before changing the memory switch settings, make sure that the communication with a host device is
disconnected.
When the printer is under the Bluetooth communication with a host device, it cannot enter the Memory Switch
Setting mode.
To Next Page
Loading...
