Star SM-L200 SERIES - Comprehensive Technical Specifications; Printing, Interface, and Power Specs; Character Sets, Barcodes, Graphics, Sensors, LEDs

31
5. General Specification
Table 5-1 General Specification
( 1/2 )
Item Specifications
Printing
Printing method
Direct line thermal printing
Resolution 203dpi (8dots/mm)
Printing speed 35mm/s
Valid printing width 48mm (384dots)
Interface
Bluetooth
Bluetooth Spec
Bluetooth Ver 3.0/4.0 [BLE]
Dual Mode
Frequency range 2.4GHz ISM band
Data transmission rate 115200bps adjustable
Data bit 8 data bit fixed
Parity bit No parity fixed
Stop bit 1 stop bit fixed
USB Micro-USB *1
Power saving Sleep mode YES
Character Set Font
Alphanumeric: 9x17, 9x24, 12x24 dots
Kanji:24x24 dots
Barcode
Symbologies
1D
UPC-A, UPC-E, EAN8, EAN13, CODE39, ITF, CODE128,
CODE93
2D QR code, PDF417
Graphics
Support bitmap printing with different density and user
defined bitmap printing (Max. 512K for total)
Detection Sensors
Printer cover open sensor, Paper-out sensor and Black
mark sensor
LED lamp
Power lamp Green
Error lamp Blue
*1. Only for the printer which "BT/USB" is displayed in the ID seal.