– 18 –
3-6-2. Removing the Paper Roll Holder
When using a paper roll with an 79.5 mm width, install the paper roll holder into the groover
as shown. When you change the eective print width (paper roll width), change the printer
utility’s memory switch setting.
For details, see the printer utility help.
Note: After using a paper roll with a width of 79.5 mm, do not change to a paper roll with
a width of 115.5 mm. This is because the printer head has deteriorated as a result of
a portion of the head having been in direct contact with the rubber roller.
Paper roll holder
To Next Page
Loading...
