BeiJing Starfire Control Technology Co.,Ltd WeChat:18901200180 QQ: 1908817881
34
Under the diagnosis interface, press the "port definition" key, enter the password 1928 and enter the port definition
interface.
The above is IO definition interface, press 【→】【←】【↑】【↓】 key to move the cursor, press [PgUp] [PgDn] key to
change the serial number and the normally open and normally closed state, or press [Enter] key to select, after setting,
press [save] key.
Restore factory value: press this key to restore the serial number to factory status (password: 1928).
7.3 modify the motor direction
If the machine tool running direction and system coordinate display direction is not consistent, can modify the
motor direction.