Starkey ZON - Self Check

10
11
Self Check
Some hearing systems can run a diagnostic test of their own
performance. This feature is called Self Check. Your hearing
care professional will check the box below if this feature is
activated.
Your Self Check feature is activated.
Your Self Check indicator is a:
Speech Indicator (Good, Make appointment)
Tone Indicator
To perform the Self Check:
1. Open and close the battery door three times.
2. Place the hearing system in your ear.
3. Listen for the status indicator.
4. Schedule an appointment with your
hearing care professional, if needed.
Somehearingaidusershavereportedabuzzingsoundintheir
hearing aids when they are using cell phones, indicating that the
cell phone and hearing aid may not be compatible. According
to the ANSI C63.19 standard (ANSI C63.19-2006 American
National Standard Methods of Measurement of Compatibility
Between Wireless Communications Devices and Hearing Aids),
the compatibility of a particular hearing aid and cell phone can
be predicted by adding the rating for the hearing aid immunity to
the rating for the cell phone emissions. For example, the sum of
a hearing aid rating of 2 (M2) and a telephone rating of 3 (M3)
would result in a combined rating of 5. Any combined rating that
equalsatleast5wouldprovide“normaluse”;acombinedrating
of 6 or greater would indicate “excellent performance.”
Immunity of this hearing aid is at least M2. The equipment
performance measurements, categories and system
classifications are based upon the best information available but
cannot guarantee that all users will be satisfied.
NOTE: The performance of individual hearing aids may vary
with individual cell phones. Therefore, please try this hearing
aid with your cell phone or, if you are purchasing a new phone,
be sure to try it with your hearing aid prior to purchase. For
additional guidance, please ask your cell phone provider for
the booklet entitled “Hearing Aid Compatibility with Digital
Wireless Cell Phones.”