Starline A96 - Page 23

Enter the menu by long press of the button
icon-long-3.png
Image not found or type unknown
icon-note-2.png
Image not found or type unknown
. After
entering, the current profile settings will be displayed.
Adjusting Command Confirmation Volume
image.png
Image not found or type unknown

image.png
Image not found or type unknown
1 — volume level of the selected signal type;
2 — number of the selected sound profile;
3 — indication of volume settings for command confirmation signals;
4 — vibration signal:
Сработал тревожныи уровень датчика удара.png
Image not found or type unknown
— on,
Датчик удара отключен.png
Image not found or type unknown
— off.
Volume adjustment is done by short pressing the buttons
icon-short-2.png
Image not found or type unknown
or
icon-short-3.png
Image not found or type unknown
, respectively. A short press of the button
icon-short-4.png
Image not found or type unknown
enables or
disables the vibration signal.
To switch to adjusting the next type of signal within the selected sound profile, press
icon-short-1.png
Image not found or type unknown
.
Adjusting Alarm Signal Volume
image.png
Image not found or type unknown
image.png
Image not found or type unknown
1 — Selected signal type volume level;
2 — Selected Sound Profile Number;
3 — Vibration Signal:
Сработал тревожныи уровень датчика удара.png
Image not found or type unknown
— on,
Датчик удара отключен.png
Image not found or type unknown
— off;
4 — Volume Adjustment Indication for Alarm Signals.
Volume adjustment is done by short pressing the buttons
icon-short-2.png
Image not found or type unknown
or
icon-short-3.png
Image not found or type unknown
, respectively. A short press of the button
icon-short-4.png
Image not found or type unknown
enables or
disables the vibration signal.
To switch to adjusting the next type of signal within the selected sound profile, press
icon-short-1.png
Image not found or type unknown
.
Adjusting Button Press Signal Volume
image.png
Image not found or type unknown
image.png
Image not found or type unknown
1 — Volume Adjustment Indication for Button Presses.
2 — Selected signal type volume level;
3 — Selected Sound Profile Number;
4 — Vibration Signal: