Starline E9v2 - Page 53

user manual
53
Deleting authorization PIN code
1. Disarm system if it is armed
2. Switch ignition O if it is On
3. Push service button or external transceiver
button 7 times.
4. Switch ignition On. 7 LED ashes and 7 beep
sounds shall follow.
5. Entry into registration mode will be conrmed
with 2 LED ashes and 2 sounds.
6. Push service button 3 times.
7. Wait for the long LED light up conrming that existing authorization
PIN code has been erased from memory.
8. Switch ignition O.
9. Exit from registration mode will be conrmed with 2 LED ashes and 2
beep sounds.