Startco Engineering Ltd. Page 12
SE-105 Ground-Fault Ground-Check Monitor Rev. 9
Pub. SE-105-M, November 24, 2005.
6. ORDERING INFORMATION
SE-105
120-Vac Supply
E 240-Vac Supply
D 120-Vac/dc Supply
(2)
L Latching Ground-Check Trip
H Harmonic Filtering
Each SE-105 is supplied with a 1N5339B termination device.
Option List
(1)
(1)
2
List options required in order shown above.
Standard, leave blank.
()
Ground-Fault CT’s:
CT200 ................................ 56 mm (2.2″) Window
CT200L .............................. 89 mm (3.5″) Window
Ground-Check Termination:
1N5339B ............................ 5-W Axial Lead
1N4553B ............................ 50-W Stud Mount
SE-TA6 .............................. 50-W Assembly
SE-TA6A ........................... SE-134C Termination
Assembly
Remote Indication and Reset:
RK-102............................... Includes two LED pilot
lights, a reset push
button, and legend plates
RK-105............................... Indication-and-Reset
Assembly
RK-105I ............................. Indication Assembly
RK-13................................. Relay Interface Module
Parallel-Path Isolator:
PPI-600V............................ For system voltages up to
600 Vac
7. WARRANTY
The SE-105 Ground-Fault Ground-Check Monitor is
warranted to be free from defects in material and
workmanship for a period of five years from the date of
purchase.
Startco Engineering Ltd. will (at Startco’s option)
repair, replace, or refund the original purchase price of an
SE-105 that is determined by Startco to be defective if it
is returned to the Startco factory, freight prepaid, within
the warranty period. This warranty does not apply to
repairs required as a result of misuse, negligence, an
accident, improper installation, tampering, or insufficient
care. Startco Engineering Ltd. does not warrant products
repaired or modified by non-Startco Engineering Ltd.
personnel.
Startco Engineering Ltd. is not liable for contingent or
consequential damages; for expenses sustained as a result
of incorrect application, incorrect adjustment, or a
malfunction; or for expenses resulting from the use of, or
inability to use, the product.
To Next Page