General
2
1. GENERAL
in this manual it is referred to by using the
symbol _m_
in this manual it is referred to by using the
symbol _h_
1.1 Dual functionality of the keys – Use.
Keys in the _+_ and _–_ group have a dual function which becomes active when you access a menu..
As you may notice, these keys have a symbol depicted at lower right. This symbol indicates their dual
functionality.
UP ARROW
ESCAPE _ESC_ _^_, _ENTER _, ENTER
LEFT ARROW _<_, _v_ _>_. RIGHT ARROW
DOWN ARROW
TASTO FUNZIONE
ESCAPE _ESC_
cancel operation
ENTER _ENTER _
when pressed once, lets you modify the parameter You can tell when the parameter
can be modified, because the * (asterisk) appears on the display
- When ENTER is pressed a second time, the change is confirmed and the asterisk
disappears.
FRECCIA SU _^_
modifies upwards by one unit
FRECCIA DESTRA _>_
modifies upwards by one tenth
FRECCIA GIU _v_
modifies downwards by one unit
FRECCIA SINISTRA _<_
modifies downwards by one tenth
Note: keeping the ARROW key pressed raises the speed of increase or decrease.
During navigation through the menus, when the display shows a full row of dots along the bottom, e.g.
[B.R.I.G.H. .8.O.] it indicates that the end has been reached in that direction, or that modification
is not allowed.
STARTEC s.r.l. San Vito al Tagl.to (PN) ITALY tel.+39 0434 85001 e-mail: info@startecitaly.com
m/h 25.0