USER menu
4
3 Press _^_ or _>_ to increase the
value by a unit or a tenth
respectively at a time
- Press _v_ or _<_ to reduce the
value by a unit or a tenth
respectively at a time
[BRIGH*92]
[BRIGH*79]
Higher value means more brightness.
Maximum value 99
Minimum value 0
4 Press _ENTER _ to confirm the value
for brightness.
[BRIGH 79] - The asterisk disappears.
5 Press _v_ or _^_ to carry on moving through the menu for making any other changes. Press the
_START _ key to save the changes you have made, or press the _ESC _ key to cancel all the changes
(see § Saving changes or Cancelling changes). This stage takes you out of the menu.
Saving the changes
To save the changes which you have made to the Rain Star 260’s memory:
STAGE ACTION DISPLAY NOTE
1 Press the START _START _ key.
Press the START _START _ key again
[CHN SAVE
[SAVES CH]
Requests SAVE CHaNges
SAVES the CHanges
Once this operation is completed, the Rain Star 260 exits from the Menu and goes to the stage of
Cancelling changes
To cancel the changes which you have made:
STAGE ACTION DISPLAY NOTE
1 Press the SCAPE _ESC__ key.
Press the ESCAPE _ESC__ key again
[CANC CHN]
[CH N SAV]
- requests CANCel CHaNges
- the CHanges are Not SAVed.
Once this operation is completed, the Rain Star 260 exits from the Menu and starts to work
The Rain Star 260 uses the metric system.
To Next Page
Loading...
Need help?
General