StarTech.com USB2G4LEXT2 User Manual

Instruction Manual
11
3. Mac OS: Open the System Proler to conrm that the USB2G4LEXT2 has installed
correctly. In the left hand column under Hardware, select “USB” and inspect the right
hand panel. If the extender has been installed correctly, you should nd it listed as a
“Hub” under the USB High-Speed Bus/USB Bus.
To open System Proler in OS X: Open the Finder, select Applications, then open the
Utilities folder and double click on the System Proler icon.
Pairing and Unpairing
Pairing the Local and Remote Extender
The extenders will be paired with each other out of the box, so no pairing action
should be required. However, if you wish to change the Local and Remote Extender
pairings across a network, then the following steps must be taken:
1. Ensure the Local and Remote Extender are directly connected to each other, or are
connected to the same subnet on your network.
2. Press and hold the Pairing button on the back of the Local Extender. Release the
button within 10 seconds. The Link LED will start ashing.
3. Within 10 minutes of activating the pairing mode on the Local Extender, press and
hold the Pairing button on the back of the Remote Extender. Release the button
within 10 seconds. The Link LED will start ashing.
4. The Link LED on both units may start ashing more slowly before nally turning on.
Once the Link LEDs are solid, the link is established between both extenders.
Note: If more than 10 minutes pass before the units are paired, then the extenders
will switch back to regular mode and reestablish the previous links they had, if any. To
cancel pairing mode, press and hold the Pairing button a second time. Release it within
10 seconds.
Unpairing an Extender
If for any reason an extender needs to have its pairing removed, this can be done
by pressing and holding the Pair button for longer than 10 seconds. Once this is
completed the unit will not be paired to any other extender.

StarTech.com USB2G4LEXT2 Specifications

General

DC-in jack	Yes
RJ-45 ports quantity	2
USB 2.0 Type-A ports quantity	4
USB 2.0 Type-B ports quantity	1
Type	Console transmitter & receiver
Certification	FCC, CE
Product color	Black
LED indicators	Activity, Link, Power
Housing material	Aluminum
Cable types supported	Cat5e, Cat6
Maximum transfer distance	100 m
Sustainability certificates	RoHS
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	USB
Input current	0.6 A
Input voltage	100 - 240 V
Output current	1 A
Output voltage	24 V
Power plug type	Type M
Power consumption (typical)	24 W
Master (outer) case width	403 mm
Master (outer) case height	275 mm
Master (outer) case length	565 mm
Harmonized System (HS) code	84733020
Quantity per master (outer) case	20 pc(s)

Weight and Dimensions

Depth	100 mm
Width	76 mm
Height	26 mm
Weight	363 g
Package depth	197 mm
Package width	194 mm
Package height	108 mm
Package weight	1200 g