StarTech.com USB2G4LEXT2 User Manual

Instruction Manual
12
Compatibility
The USB2G4LEXT2 complies with USB 1.1 and USB 2.0 specications. However, there is
no guarantee that all USB devices or hosts will be compatible with the USB2G4LEXT2,
as there are a number of dierent characteristics that may impact the operation of USB
devices over extended distances.
Troubleshooting
The following table provides troubleshooting tips. The topics are arranged in the order
in which they should be executed in most situations.
Problem Cause Solution
All LEDs on
the Local
Extender are
o.
• The Local Extender
is not receiving
power from the
USB port.
1. Ensure that the host computer is
connected to the Local Extender.
2. Move the USB connector to another
USB port on the host computer.
All LEDs on
the Remote
Extender are
o.
• The Remote
Extender is not
receiving power
from the AC adapter.
1. Ensure that the AC power adapter is
properly connected to the Remote
Extender.
2. Check that the AC adapter is
connected to a live source of electrical
power. Check that the Remote power
LED is illuminated.
Link LEDs on
the Local and
the Remote
Extenders are
o.
• There is no
connection between
the Local and
Remote Extenders.
1. Ensure Cat 5e cable is connected
between the Local and Remote
Extenders. Cat 5e or better cable, UTP
with a straight through connector and
no crossovers, and 8 conductor RJ45
connectors are used at both ends.
2. Connect a short Cat 5e patch cord
between the Local and Remote
Extenders to determine if the original
Cat 5e cable is defective.

StarTech.com USB2G4LEXT2 Specifications

General

DC-in jack	Yes
RJ-45 ports quantity	2
USB 2.0 Type-A ports quantity	4
USB 2.0 Type-B ports quantity	1
Type	Console transmitter & receiver
Certification	FCC, CE
Product color	Black
LED indicators	Activity, Link, Power
Housing material	Aluminum
Cable types supported	Cat5e, Cat6
Maximum transfer distance	100 m
Sustainability certificates	RoHS
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	USB
Input current	0.6 A
Input voltage	100 - 240 V
Output current	1 A
Output voltage	24 V
Power plug type	Type M
Power consumption (typical)	24 W
Master (outer) case width	403 mm
Master (outer) case height	275 mm
Master (outer) case length	565 mm
Harmonized System (HS) code	84733020
Quantity per master (outer) case	20 pc(s)

Weight and Dimensions

Depth	100 mm
Width	76 mm
Height	26 mm
Weight	363 g
Package depth	197 mm
Package width	194 mm
Package height	108 mm
Package weight	1200 g