36
738.955 | 10.40
EN
The speed control function makes a distinction between
the "absolute temperature control (AbS)" and "differen-
tial temperature control (diF)".
Press the
SET
button for approx. 2 seconds to tog-
gle between "AbS" and "diF".
Depending on the "AbS" or "diF" setting, the following
setting options are available:
The display shows the setting "diF":
To exit the settings menu, press the
button. The
main menu appears.
The display shows the setting "AbS":
Press the
button to set the temperature
value.
Temperature and "AbS" flash alternately.
Press the
SET
button for approx. 2 seconds until
only the temperature indicator flashes.
Change the temperature using the
or
but-
tons.
To exit the settings menu, press the
button. The
main menu appears.
To Next Page
Loading...
