Steelcase Migration SE - Factory Setting on Delivery; Accessories; Migration SE at a Glance

Product description
_______________________________________________________________
6 153310
3.3 Factory setting on delivery
■ Lift 1 variant: 740 mm
■ Lift 2 variant: 740 mm
You can change these settings according
to your needs. The corresponding
descriptions can be found under 5
Operating and adjusting .
3.4 Accessories
A wide range of accessories is available in various
materials, surface treatments and dimensions. Please
follow the instructions for using the components and
accessories (see 5 Operating and adjusting ).
The following accessories are available for the
Migration SE Desk & Bench:
■ Cable duct/central cable duct (bench)
■ Vertical electrification
■ Cable chain
■ Side panel and compartment shelf (only for the
desk)
■ CPU holder and cable system
■ Organisation rail
■ Modesty panel (only for the desk)
■ Partito back panel
■ Divisio back panel
■ Divisio side panel (only for the desk)
Please contact our Customer Service Department for
detailed information on available system components
and for additional orders and subsequent deliveries
(see 9 Service ).
3.5 Migration SE at a glance
The illustrations show the Migration SE Desk, as
well as the Migration SE Bench along with their
components and accessories.
5 Operating and adjusting describes how
to adjust the desktop height.
Fig 3-1: Migration SE Desk, Lift variant 1/2 + fixed height
1
Desktop
2
Cantilever (optional)
3
Telescopic column
4
Runner
5
Control panels (only for lift 1/2)
6
Adjusting screw for height levelling
Migration SE Bench
Fig. 3-2: Migration SE Bench, Lift variant 1/2
1
Desktop
2
Cantilever (optional)
3
Telescopic column
4
Cross-member
5
Control panels
6
Adjusting screw for height levelling
3
5
6
2
1
3
6
4
6
1
2
3
4
5