Transport and storage
_______________________________________________________________
8 153310
4 Transport and storage
Danger of crushing and shearing!
Body parts or objects could be crushed or sheared off as a result of the electrical
height adjustment process.
Maintain sufficient lateral clearance (at least 25 mm) to all surrounding objects, walls, etc.
throughout the lifting range.
Set up the desk in such a manner that there is sufficient space for lift movements and for
the performance of maintenance tasks.
Fig. 4-1: Safety labels (“Ology Desk” serves as an example – the illustration also applies to the Migration SE Desk & Bench)
4.1 Safety-relevant information
Risk of injury or damage!
The fastening screws could tear if the desk
is lifted by the desktop or the attached
components.
Always take hold of the desk at the
underframe to transport or move it.
4.2 Interim storage
Whenever the Migration SE Desk & Bench
product is temporarily stored before setup, the
following conditions must be met:
■ Intact transport packaging
■ The floor must have sufficient load-bearing
capacity
■ Dry floor
To Next Page
Loading...
