EasyManua.ls Logo

Steinbach Poolrunner Battery Pro - Preparation; Charging the rechargeable battery; Operation

Steinbach Poolrunner Battery Pro
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
lit yellow
The device is done cleaning.
Preparation
Charging the rechargeable battery
WARNING!
Risk of re!
Charging at a temperature below 10 °C leads to chemical damage to
the cell and can cause a re.
- Charge the rechargeable baery at room temperature.
1. Switch o the device before charging.
2. Pull the cap
5
out of the charging socket.
3. Connect the charger to the device.
4. Plug the charger into a socket.
The charge control indicator is lit red.
The rechargeable baery is charging.
5. When the charge control indicator is lit
green, disconnect the charger from the
power supply and the device.
6. Put the cap
5
in the charging socket.
The rechargeable baery is charged.
Operation
Check the following before each use:
- Is there visible damage on the device?
- Is there visible damage on the control elements?
- Do all individual parts funcon?
- Are the accessories in perfect condion?
- Are all cables in perfect condion?
Do not start up a damaged device or damaged accessories. Have them checked by the
manufacturer or its customer service or a qualied service technician.
1
34

Related product manuals