Steinbach Poolrunner Battery Pro - Cleaning the pool; Inserting the filter

Cleaning the pool
Observe the following before cleaning your pool:
- We recommend thoroughly cleaning the device before using it for the rst me.
- Remove any cover or lm from the pool.
- Remove obstacles (such as a ladder) from the pool.
- Switch o the lter system at least one hour before the start of cleaning so that
parcles in the water can sele on the oor.
- Never let the device run outside of the water as this can cause damage even aer a
short me.
Proceed as follows to clean your pool:
1. Insert the lter unit.
2. Place the device in the pool and switch it on.
Inserting the filter
1. Open the hatch
7
.
2. Posion the lter unit
8
on the intake
duct.
2
7
3
8
35
en