Steinbach Poolrunner Battery Pro - Storage; Troubleshooting

2. Thoroughly rinse the lter unit with
plain tap water.
3. Close the cover
9
of the lter unit so
that it locks in place.
The lter is cleaned.
Storage
1. Thoroughly clean the device (see secon "Cleaning").
2. Let all parts dry completely.
3. Fully charge the device.
Recharging is required aer at latest 3 months due to self-discharge.
4. Then store the device and its accessories in a dry and frost-free place (≥ +5 °C)
without direct sunlight.
Troubleshooting
Fault descripon
Cause Remedy
Charger blinks red. Low rechargeable baery
voltage or faulty rechargeable
baery.
Contact customer service.
Status indicator is lit pink. Device is out of the water. Switch the device o. Only
switch the device back on once
it is in the water and all the air
has escaped.
10
11
9
39
en