6
MANUAL OPERATION
WARNING
1.) LOOSEN JAM NUT ON FLOW CONTROL
2.) TURN THE SET SCREW FULLY CLOCKWISE
2.) OPERATE FUNCTIONS AS NEEDED TO STOW CRANE
3.) TURN THE SET SCREW FULLY COUNTER CLOCKWISE
4.) HAVE UNIT SERVICED
PROLONGED MANUAL OPERATION WILL CAUSE SEVERE DAMAGE
TO THE HYDRAULIC SYSTEM.
TO OPERATE CRANE MANUALLY:
IN CASE OF RADIO FAILURE THE CRANE CAN BE OPERATED USING MANUAL
OVERRIDES LOCATED ON THE VALVE BANK. USE THE MANUAL OVERRIDES
only TO GET THE CRANE INTO A STOWED POSITION FOR TRAVEL. HAVE
THE EQUIPMENT SERVICED FOR NORMAL RADIO USE.
Ext In
Main Dn
Winch Dn
MANUAL
Ext Out
Main Up
Winch Up
OVERIDE
Rot Cw
Rot Ccw
To Next Page
Loading...