To Next PageTo Next Page
Need help?Do you have a question about the stellar labs LubeMate and is the answer not in the manual?
Covers safe usage and operator instructions for the lube system.
Lists qualifications and responsibilities for system operators.
Details daily checks before operating the equipment for safety.
Shows placement of safety and identification decals on the system.
Guide to safe and proper operation of the lube transfer system.
Procedures for transferring waste oil within the system.
General guidance on installing system components.
Overall installation considerations for permanent or mobile systems.
Notices regarding federal law and installer responsibilities for compliance.
Provides torque specifications for various bolt sizes and grades.
Detailed steps for installing the lube system.
Recommendations for using the system in cold weather.
General rules and precautions for performing maintenance.
Schedule for routine inspections and maintenance tasks.
Assembly drawing for the V160 pumps, reels, and cabinet.
Assembly drawing for the permanent V160 assembly with separate reels.
Assembly drawing for the 42R 2N/1W cabinet assembly.
Assembly drawing for the mobile V160 assembly.
Assembly drawing for the V160 tank assembly.
Assembly drawing for the mobile skid assembly.
Assembly drawing for the drip pan assembly.
Assembly drawing for the sightglass cage assembly.
Assembly drawing for the fresh oil tank breather cap.
Assembly drawing for the salvage oil tank dipstick cap.
Assembly drawing for the fresh oil pump mount assembly.
Assembly drawing for the fresh oil pump assembly (5:1 ratio).
Assembly drawing for the salvage oil pump assembly.
Assembly drawing for the salvage oil reel assembly.
Assembly drawing for the fresh oil reel assembly.
Assembly drawing for the mounting kit (4 spring).
Assembly drawing for the optional mounting angle kit.
Assembly drawing for the 7.5 gallon drain pan assembly.
Assembly drawing for the control panel.
Covers safe usage and operator instructions for the lube system.
Lists qualifications and responsibilities for system operators.
Details daily checks before operating the equipment for safety.
Shows placement of safety and identification decals on the system.
Guide to safe and proper operation of the lube transfer system.
Procedures for transferring waste oil within the system.
General guidance on installing system components.
Overall installation considerations for permanent or mobile systems.
Notices regarding federal law and installer responsibilities for compliance.
Provides torque specifications for various bolt sizes and grades.
Detailed steps for installing the lube system.
Recommendations for using the system in cold weather.
General rules and precautions for performing maintenance.
Schedule for routine inspections and maintenance tasks.
Assembly drawing for the V160 pumps, reels, and cabinet.
Assembly drawing for the permanent V160 assembly with separate reels.
Assembly drawing for the 42R 2N/1W cabinet assembly.
Assembly drawing for the mobile V160 assembly.
Assembly drawing for the V160 tank assembly.
Assembly drawing for the mobile skid assembly.
Assembly drawing for the drip pan assembly.
Assembly drawing for the sightglass cage assembly.
Assembly drawing for the fresh oil tank breather cap.
Assembly drawing for the salvage oil tank dipstick cap.
Assembly drawing for the fresh oil pump mount assembly.
Assembly drawing for the fresh oil pump assembly (5:1 ratio).
Assembly drawing for the salvage oil pump assembly.
Assembly drawing for the salvage oil reel assembly.
Assembly drawing for the fresh oil reel assembly.
Assembly drawing for the mounting kit (4 spring).
Assembly drawing for the optional mounting angle kit.
Assembly drawing for the 7.5 gallon drain pan assembly.
Assembly drawing for the control panel.
General| Brand | stellar labs |
|---|---|
| Model | LubeMate |
| Category | Construction Equipment |
| Language | English |
