EasyManua.ls Logo

Stels 800 GUEPARD - Page 27

Default Icon
126 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RIGHT UNIT
650/800/850 GUEPARD
25
After that the four wheel drive indicator will
flash on the dashboard display.
To switch the transmission to «2WD» mode from
«4WD» mode, stop the vehicle category T3b and
set the button (1) in the «2WD» position.
Make sure that the indicator flashes on the
display
1. Mode switching
button
«2WD / 4WD»
2. Lock lever
(mechanical)
3. Throttle lever
arm
______________________________
Always stop the vehicle category T3b before
shifting the transmission modes. The vehicle
category T3b behavior in 2WD and 4WD modes
differs significantly in the same road conditions.
When shifting to another mode after longterm
movement in one mode, the steering conditions
may change abruptly. This may distract the driver
increasing the risk of control loss and accident.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Switching between 4WD (four wheel drive)
and DIFFLOCK (differential lock) modes.
The vehicle category T3b is equipped with
differential lock operating in the four wheel
drive mode. Select the transmission modes
depending on the road conditions:
● «4WD» (four wheel drive mode):
wheels are powered
● «LOCK» (four wheel drive mode with
differential lock on):
Front and rear wheels are powered, the
differential lock is on. Unlike «4WD» mode, in
«LOCK» mode all the wheels turn at the same
speed. It is used to additionally increase the
flotation.
1. Mode switch
button
«LOCK/4WD»
2. Lock lever
(mechanical)
3. Throttle lever
arm
manufacture website : stelsoffroad.com

Related product manuals