MAINTENANCE
650/800/850 GUEPARD
75
ATTENTION:
In case of a critical driving situation causing the vehicle overload or accidental mechanical effect (hidden
obstacle impact), the driver should stop the vehicle, perform a visual inspection, make sure that there are no
signs of damage or other unwanted consequences, and continue driving upon correcting the detected faults.
NOTE:
The air filter filtering element should be replaced more frequently when operated in humid or dusty
conditions. Brake hydraulic drive maintenance:
- perform regular checks and, if necessary, correct the brake fluid level.
- replace the brake drive hoses in case of fractures and damages.
.
Lubrication recommendations:
- inspect and lubricate timely all the elements in the periods indicated in this table.
- components that are not indicated in the table, should be lubricated during general lubrication period.
.
Recommended lubrication greases:
:
Lubricated assemblies Lubrication Lubrication method
1.
Engine
Engine oils 10W-40 SF
Add the required amount
by a dipstick.
2. Brakes Brake fluid DOT-4
Maintain the required level
Maintain the required level
4. Suspension lever pins Lubricate, if necessary.
5. Steering column Multi-purpose lithium-based greaseLubricate, if necessary.
6. Hub bearing Lubricate, if necessary.
7. Brake drive center guide Lubricate, if necessary.
3.
Front and rear gear boxes Transmission gear oil
SAE75W90 API GL-5
Multi-purpose lithium-based grease
Multi-purpose lithium-based grease
Multi-purpose lithium-based grease
manufacture website : stelsoffroad.com
To Next Page
Loading...
