Stels 800 GUEPARD - Maintenance and Checks; Pre-Operation Checks

36
650/800/850 GUEPARD
PRESTART CHECKS
THE VEHICLE CATEGORY T3b PRESTART CHECKS
ELEMENTS OPERATIONS PAGE
Fuel
Oil in the front
gear box
● Check the fuel tank level. If necessary fill up the recommended fuel type.
● Check the fuel pipes for leakage. If necessary, correct the fault.
● Check the oil level and, if necessary, fill up to the recommended level.
● Check the vehicle category T3b systems for oil leakages. Correct the fault.
● Check the vehicle category T3b systems for oil leakages. If necessary, correct the fault
● Check the vehicle category T3b systems for oil leakages. If necessary, correct the fault
● Check the cooling agent level in the expansion tank and, if necessary, fill up the recommended
cooling agent to the indicated level.
● Check the engine cooling system for leakages. If necessary, correct the fault.
● Check the operability If the drive is too light or “cotton”, contact a repair workshop for
the hydraulic system bleeding.
● Check the brake pads for wear, replace them, if necessary.
● Check the brake fluid level in the tank and, if necessary, fill up the recommended
brake fluid to the indicated level.
● Check the hydraulic system for leakage. If necessary, correct the fault.
Engine oil
Oil in the rear
gear box
Cooling agent
____________________________________________________________________________
Prior to every vehicle category T3b operation check its condition and its mechanisms operable
condition. Follow all the instructions on the vehicle category T3b check and maintenance,
observing the regulation provided in the Operation Manual. Otherwise, the accident or equipment
damage likelihood increases.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Hand-brake
38, 79
38, 81
38, 82
38, 84
29, 39, 85
38, 31
manufacture website : stelsoffroad.com
PRESTART CHECKS 650/800/850 GUEPARD
37
ELEMENTS OPERATIONS PAGE
Foot brake
● Check the operability If the drive is too light or “cotton”, contact a repair workshop
for the hydraulic system bleeding.
● Check the pedal free stroke, adjust it, if necessary.
● Check the brake pads for wear, replace them, if necessary.
● Check the brake fluid level in the tank and, if necessary, fill up the recommended
brake fluid to the indicated level.
● Check the hydraulic system for leakage. If necessary, correct the fault.
● Make sure that operation is smooth. If necessary, lubricate the wire cable and control
elements.
● Make sure that the wire cable is moving easily, if necessary, correct the fault.
● Make sure that operation is smooth. If necessary, lubricate it.
● Check the wheels condition. If necessary, replace them.
● Check the tyres condition and the tread depth. If necessary, replace them.
● Check the tyre inflation pressure. If necessary, correct it.
● Make sure that operation is smooth. If necessary, lubricate the pedal axis of revolution.
● Make sure that operation is smooth. If necessary, lubricate the handle axis of revolution.
● Check them for damage and fractures, if necessary, replace them.
● Make sure that all the nuts, bolts and screws are tightened as required.
● Check the correct operation of the head lamps, position lamps, rear lamps, turn lights,
brake lights and indicators. If necessary, correct the fault.
● Make sure that the accumulator battery is charged and connected correctly
Throttle lever
Control wire
cables
Wheels and
tyres
Brake pedal
Brake levers
Dust covers
Chassis fixture
components
Lighting devices,
switches
Accumulator unit
NOTE:_____________________________________________________________________________________________________
The maintenance of some elements presented in the table should be carried out in repair workshops. The operations which should be
carried out in special repair workshops are described on page 70.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
39, 85
26, 40, 88
88
40, 89
29, 39 - 85
29, 854
23, 90, 91
91
41
94
manufacture website : stelsoffroad.com