CAUTION:
● Make sure that all cables and wires
are in place when closing the hood.
● Do not drive the vehicle with the
hood open, unlatched, or removed.
1. Projection (x2) 2. Slot (x2)
3. Slot (x2) 4. Projection (x2)
Console
To install
1. Place the console in its original
position.
2. Install the parking brake lever boot.
3. Install the seats.
CAUTION:
● When installing the console, be sure
not to pinch the cables or wires.
● Make sure that the groove at the
bottom of the parking brake lever
boot and the drive select lever boot
fits securely around the edge of the
hole in the console.
To Next Page
Loading...
