Remove access panel.
1. Coolant reservoir
With vehicle on a level surface, liquid
should be between MIN. and MAX.
level marks of coolant reservoir.
NOTE: When checking level at
temperature lower than 20℃,it m ay be
lightly lower than MIN. mark. Add
coolant up to MAX. mark if required.
Use a funnel to avoid spillage. Do not
overfill.
Properly reinstall and tighten filler cap
and reinstall access panel.
If the coolant is added in the coolant
reservoir, check the level in the radiator
too. Add coolant if necessary.
n order to avoid getting
burned, do not remove the
radiator cap if the engine is
hot.
NOTE: A cooling system that frequently
requires coolant is the indication of
leaks or engine problems. See an
authorized dealer.
Coolant Replacement
WARNING
In order to avoid potential
burns, do not remove the
radiator cap or loosen the
coolant drain plug if the the
engine is hot.
Open the front access panel and
remove the radiator cap.
Unscrew the coolant drain plug and
drain the coolant into a suitable
To Next Page
Loading...
