Shifting: Neutral to Reverse
1. Stop the vehicle. Keep your foot off
the accelerator pedal.
2. Apply the brake pedal.
3. Shift from neutral to reverse or vice
versa by moving the drive select
lever along the shift guide.
4. Check behind for people or
obstacles, then release the brake
pedal.
5. Press the accelerator pedal
gradually and continue to watch to
the rear while backing.
NOTE:
● When in reverse, the revere
indicator light should be on. If the
light does not come on, ask an
dealer to inspect the reverse
indicator light electrical circuit.
● Due to the synchronizing
mechanism in the engine, the light
may not come on until the vehicle
starts moving.
To Next Page
Loading...
