Accelerator pedal
Press the accelerator pedal down to
increase engine speed. Spring
pressure returns the pedal to the rest
position when released. Ways check
that the accelerator pedal returns
normally before starting the engine.
1. Accelerator pedal
Before starting the engine, check the
accelerator pedal to be sure it is
operating smoothly. Make sure the
accelerator pedal fully returns to the idle
position as soon as it is released.
! WARNING
Malfunction of the accelerator pedal.
POTENTLAL HAZARD
The accelerator pedal could be hard to
operate, making it difficult to speed up or
slow down then you need to. This could
cause an accident.
WHAT CAN HAPPEN
Check the operation of the accelerator
pedal before you start the engine. If it
does not work smoothly, check for the
cause. Correct the problem before
operating the vehicle. Consult an dealer
if you can’t find or solve the problem
yourself.
HOW TO AVOID THE HAZARD
To Next Page
Loading...
