Jump-starting
Jump-starting the vehicle should be
avoided. The battery should be
removed and charged instead.
however, if the vehicle must be
jump-started, proceed as follows.
1. Turn the key to “OFF”.
2. Open the hood. Remove the
battery compartment cover.
4. Using a charged 12V battery,
connect the positive lead of the
jumper cable to the positive
terminal of the battery in the
vehicle and the other end of the
positive lead to the positive terminal
of the charged battery.
1. Jumper cable positive lead
2. Jumper cable negative lead
5. Connect the negative lead of the
jumper cable to the negative terminal
of the negative lead to an unpainted
metal surface of the vehicle.
To Next Page
Loading...
