! WARNING
Do nor connect the negative lead of
the jumper cable to the negative
terminal of the battery in the vehicle.
● Be especially careful not to:
●touch the positive lead of the jumper
cable to the negative lead.
●reverse the polarity of the jumper
cables when connecting to the
batteries-battery explosion and/or
serious damage to the electrical
system may occur.
If a fuse blows
All of the electrical circuits on your UTV
have fuses to protect them from
damage caused by excess current flow )
short circuit or overload).
If something electrical on your UTV
stops working, the first thing you should
check for is a blown fuse (1).
Check all the fuses before looking
elsewhere for another possible cause
of the problem. Replace any blown
fuses and check component operation.
(1) Blown fuse
To Next Page
Loading...
