sticking, and snaps back
automatically when it is released.
● Clutch pedal
Check the free play of clutch pedal
and adjust if needed. Press the clutch
cable to make sure it moves
smoothly without sticking, and snaps
back automatically when it is
released.
● Brakes
Press the brake pedal several times,
check for proper brake pedal free
play. Make sure there is no brake
fluid leakage.
● Engine stop
When engine is running, turn the
switch key counterclockwise. Make
sure engine stops.
● Steering Wheel
Check that the wheels turn properly
as you turn the steering wheel.
●Cable
Check the cable housing for wear.
Check the fittings are tight. Replace
or tighten as needed.
●Tie rod
Check the tie rod housing for wear.
Check the fittings are tight. Replace
or tighten ad needed.
To Next Page
Loading...
