1. REMOVE LAMP COVER
Twist cover gently and pull away from
lamp. Take care to keep the water
sensor pins dry prior to activating.
2. PRESS ACTIVATION BUTTON
Once for 1 liter treatment (twice for 4 liter
treatment if using RapidUV™ RESERVOIR,
sold separately). LED(s) will ash
green to indicate unit is ready.
3. SUBMERGE IN CLEAR
WATER AND AGITATE
When water sensor pins detect water,
lamp will illuminate. When treatment is
complete and successful, lamp will turn
off and green indicator(s) will ash.
A ashing or steady red indicator means treatment was unsuccessful.
See “QUANTUM™ LED Indicator Guide.”
Be sure to wipe bottle threads dry before drinking.
4 Liter Purification Instructions on page 12
HOW TO PURIFY 1 LITER
CAUTION: Volumes larger than 1 liter can only be treated in a
RapidUV™ Reservoir included in the Rapid Purication System. (sold
separately as an accessory to the Quantum UV™ Purier)
10 | QUANTUM RAPID PURIFICATION SYSTEM • www.steripen.com
To Next Page
Loading...
