1. REMOVE FITSALL FILTER &
CARTRIDGE AS ONE UNIT.
Remove FitsAll Filter cup and cartridge as
one unit; detach Filter Cartridge; wipe FitsAll
Filter cup; and reattach cup to reservoir by
graping the glow ring and inserting rmly.
Burp the air from reservoir by gently rocking
back and forth so air is expelled and the water
level is at the top of the purifying port.
2. INSERT QUANTUM™ INTO
FILTER CUP. INSERT BOTH AS
ONE UNIT INTO PURIFICATION
PORT. CLICK ACTIVATION
BUTTON SELECTING 4 LITER
TREATMENT. AGITATE UNTIL
GREEN LED IS OBSERVED.
Insert SteriPEN® QUANTUM™ into lter
cartridge orice within Filter Cup. Refer to LED
indicator guide for a successful treatment. During
treatment, agitate water for best results. Note
glow ring will glow during water treatment.
3. REMOVE FILTER & QUANTUM™
AS ONE UNIT, RECAP, DISPENSE
OR DRINK FROM POUR SPOUT.
Remove lter cup and QUANTUM™ together as
ONE unit. Wipe down the QUANTUM™, lter
cup, and port. Screw cap onto purifying port
snugly. Dispense as needed from pour spout.
HOW TO PURIFY 4 LITERS
IN RapidUV™ RESERVOIR
STERIPEN USER GUIDE | 13
To Next Page
Loading...
