EasyManua.ls Logo

SteriPEN Quantum - Battery Guide

SteriPEN Quantum
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DID YOU KNOW? QUANTUM™ can treat 4 liters of
water only using our proprietary RapidUV™ Reservoir. When
used with the RapidUV™ Reservoir, QUANTUM™ can treat 4
liters of water in 150 seconds. If you are not utilizing the
RapidUV™ Reservoir, only use the QUANTUM™ to purify 1
liter volumes at a time.
QUANTUM™ runs on disposable alkaline batteries, lithium batteries,
or rechargeable nickel metal hydride (NiMH) AA batteries with a
2300mAh capacity.
For best results, always use quality, name brand batteries,
like Energizer® or Panasonic Eneloop®.
BATTERY GUIDE
1. REMOVE BATTERY CAP
Remove battery cap by rotating counterclockwise
so that cap arrow points to open lock icon ( ).
2. INSTALL BATTERIES
Install AA batteries with polarities as shown in
battery compartment. For best performance,
replace all batteries at the same time.
3. REPLACE CAP
Replace battery cap by aligning cap with
open lock icon. Then, rotate cap clockwise
until arrow points to closed lock icon ( ).
STERIPEN USER GUIDE | 11

Related product manuals